Free delivery from £50 on eligible UK orders
Free delivery from £50 on eligible UK orders · Collect from Acton · Trade & retail welcome
A 150 mm blade does not tell you whether a whole saw will fit around the job. Before choosing the C.K T0834 junior hacksaw, decide whether you need a complete saw or a blade for a frame you already own. Then consider the space in which the saw must move.
The T0834 is the complete junior hacksaw model in C.K’s product sheet. The dated sheet identifies a nominal 150 mm blade and barcode 5013969408706. Use the model when comparing complete saws; use the existing frame’s blade specification when buying a spare.
For example, if you already have a frame and need a replacement blade, start with that frame’s reference and blade requirements. The word “junior” alone is not enough to establish a match. If you need both frame and blade, a blade-only product will not fulfil that purchase.
The photograph helps you see why clearance matters: the frame sits above the blade and the handle extends behind it. When considering a cut close to a wall, corner or another fitting, include room for that frame and your hand, as well as room for the saw to move along the intended cut. A blade that reaches the work is only one part of that assessment.

Make a note of the workpiece material, its section dimensions and the surrounding obstructions. Those are useful criteria for comparing a saw and blade with the job. The 150 mm figure is a blade length, not a stated cutting depth or a material rating; select a blade whose own specification covers the intended material.
C.K’s sheet dated 27 January 2025 says two blades in total. The APM listing photograph shows one fitted blade; the current supplied contents have not been physically verified. If a spare blade is essential to your purchase, resolve that point before buying.
Choose the T0834 when a complete junior hacksaw is what you need and its blade specification and working clearance meet your task. If the purchase is only to renew an existing blade, establish that frame’s requirements first.
Source: C.K T0834 product sheet, dated 27 January 2025 (PDF, page 1).
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
Leave a comment