Free delivery from £50 on eligible UK orders
Free delivery from £50 on eligible UK orders · Collect from Acton · Trade & retail welcome
A white wall plate with two round connectors can look familiar without telling you which port serves which equipment. When you need a replacement, record the markings on the existing plate and the labels at the equipment end. The labels and the exact model reference are the evidence to carry into the order.

Look at the front of the existing plate without loosening it. If it has labels, write them down as printed. A plate may say SAT at one position and TV or AERIAL at another. Copy those words and note the position as viewed from the front. Write “unmarked” if there is no legible label. A straight-on photo can help distinguish the two positions, especially when they are behind a unit and difficult to see.
Then make a separate note of the external lead and the label beside the connector on the TV or receiver, where these are already accessible. If the plate label and equipment label appear to tell different stories, keep both observations in the enquiry. For instance, “left port unmarked, lead runs to a receiver input labelled SAT” describes what you know. It leaves room for an aerial or satellite installer to verify the feed.
For the Click Curva CCA157, Scolmore names two signal roles: an isolated satellite outlet and an isolated coaxial outlet. The photograph shows one connector that projects and one set into the face. The manufacturer’s product page identifies the combination of roles but the information used here does not assign those roles to left and right. If you need that assignment for a replacement, ask for the exact documentation or have the installer confirm it before you order.
The word “isolated” belongs on the enquiry, especially where the existing plate or job specification calls it out. Keep any visible make, model and isolation wording together. The picture of a similar-looking plate does not establish whether it has the same isolation arrangement, supports the same equipment or fits the existing box. A receiver specification can also call for a particular connector or signal path, so include that detail rather than assuming that two round connectors are interchangeable.
One practical format is to record port marking, position, equipment input and plate reference on a separate line for each port. Add a clear photo of the front and any packaging or paperwork with a model code already available. If there is no paperwork and the face is unlabelled, send the photo and equipment reference for confirmation. Leave the plate in place for that enquiry. Where the feed, fit or isolation requirement remains unclear, an aerial or satellite installer can check the existing arrangement.
Buy now: Click Curva CCA157 isolated satellite and coaxial outlet
Manufacturer reference: Scolmore CCA157 product information.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
Leave a comment