UK Plumbing & Electrical News
RSS-
Electric vehicle (EV) charging point installation has become one of the fastest-growing sectors for UK electricians. This guide covers the technical requirements, regulatory framework, and practical wiring considerations for domestic and light commercial EV charge point installation — including BS 7671 Section 722, OZEV grant requirements, PME earthing risks, and Type 2 charger wiring.Read now
-
Electrical Test Equipment for UK Electricians: Multifunction Testers, Insulation Resistance, and Loop Impedance — A Buyer's Guide
A practical buyer's guide to electrical test equipment for UK electricians — multifunction testers, insulation resistance testers, loop impedance testers, voltage testers, RCD testers, and clamp meters. BS 7671 compliance and EIC/EICR requirements explained.Read now -
Underfloor Heating Thermostats and Controls: Wiring, Programming, and Zone Control
Complete guide to UFH thermostats, zone controllers, and actuators for wet and electric underfloor heating systems. Covers air and floor-sensing thermostats, PID control, manifold actuators, wiring centres, OpenTherm integration, BS 7671 circuit protection for electric UFH, commissioning procedures, and fault diagnosis.Read now -
Electric Trace Heating: A Guide to Pipe Frost Protection for Plumbers and Electricians
Read nowElectric Trace Heating: A Guide to Pipe Frost Protection for Plumbers and Electricians Frozen pipes are one of the most predictable forms of property damage in the UK — and one of the most preventable. When a burst pipe claim...
-
UK Electrical Earthing Systems: TN-S, TN-C-S (PME), and TT — What Every Electrician Must Know
Read nowUK Electrical Earthing Systems: TN-S, TN-C-S (PME), and TT — What Every Electrician Must Know UK Electrical Earthing Systems: TN-S, TN-C-S (PME), and TT — What Every Electrician Must Know Understanding the earthing system arrangement of a property is fundamental...
-
Earth Bonding and Equipotential Bonding: The UK Electrician's Compliance Guide
Read nowEarth Bonding and Equipotential Bonding: The UK Electrician's Compliance Guide Earth Bonding and Equipotential Bonding: The UK Electrician's Compliance Guide Earth bonding is one of the most safety-critical elements of any UK domestic electrical installation, yet it is also one...
-
Fire-Rated LED Downlights: Specifications, Zone Requirements, and Installation Guide
Read nowA technical guide for electricians covering fire-rated downlight standards (Approved Document B, BS EN 60598, BS 7671 18th Edition), bathroom zone IP requirements, LED specifications, integrated vs GU10 architectures, IC ratings, fire hoods, and a specification quick-reference table.
-
Surge Protection Devices and Arc Fault Detection Devices: What UK Electricians Need to Know Under BS 7671:2022
Read nowAmendment 2 to the 18th Edition Wiring Regulations (BS 7671:2022) made surge protection devices (SPDs) and arc fault detection devices (AFDDs) expected — and in some cases mandatory — on new installations. This trade guide covers what each device does, when it is required, and what to specify for consumer unit work in domestic properties.
-
EICR Explained: Electrical Installation Condition Reports for Landlords and Electricians
Read nowEICR Explained: Electrical Installation Condition Reports for Landlords and Electricians The Electrical Installation Condition Report (EICR) — sometimes still called a Periodic Inspection Report (PIR) — is the formal document produced after a thorough inspection and testing of an existing...