UK Plumbing & Electrical News

Thread sealing is one of the most frequently performed tasks in plumbing and gas installation — and one where the wrong material choice can cause failures that are dangerous, costly, or both. PTFE tape, hemp (or linen thread), and jointing compounds each have distinct applications, approval statuses

Solvent cement welded (solvent weld) waste pipe is the joint of choice where a permanent, leak-free connection is required without the risk of push-fit joints pulling apart under movement or thermal expansion. Widely used in commercial applications, concealed runs behind tiled walls, and under-sink

Replacing a radiator is one of the most common central heating tasks a UK plumber will face. Whether you are upgrading an undersized panel radiator, swapping a corroded unit, or relocating a radiator during a bathroom or kitchen refit, the core process is the same: isolate, drain, disconnect, fit, r

Electric vehicle (EV) charging point installation has become one of the fastest-growing sectors for UK electricians. This guide covers the technical requirements, regulatory framework, and practical wiring considerations for domestic and light commercial EV charge point installation — including BS 7671 Section 722, OZEV grant requirements, PME earthing risks, and Type 2 charger wiring.

A complete trade guide to first fix plumbing for UK new builds and renovations. Covers water supply, hot water, drainage, gas, and heating pipe runs; notching and drilling regulations under Building Regulations Part A; pressure testing before closing in; and compliance with Part G and Part H.

A practical buyer's guide to electrical test equipment for UK electricians — multifunction testers, insulation resistance testers, loop impedance testers, voltage testers, RCD testers, and clamp meters. BS 7671 compliance and EIC/EICR requirements explained.

Low water pressure, pressure drops, and fluctuating supply — a practical guide for UK plumbers covering mains, boosted, and system pressure diagnosis and remedies.

A buying checklist for strainers, cartridges and heating debris filters: match the function, fluid, exact model and installation requirements before ordering.