Knightsbridge VFR200I 2-Way Dimmer Module – 5–150W LED
The Knightsbridge VFR200I is an offset replacement dimmer module with rotary dimming and push on/off control. It supports selectable trailing-edge and leading-edge modes and is supplied preset to trailing edge.
- Model: VFR200I
- Dimmable LED load: 5–150 W
- Incandescent / halogen load: 10–200 W
- Maximum lamp count: 15, as listed in the manufacturer datasheet
- Supply: 230 V, 50 Hz
- Manufacturer dimensions: 65 mm high × 25 mm wide × 40 mm overall depth
- Minimum mounting-box depth: 35 mm
- Construction: polycarbonate; IP20, indoor use
- Terminal capacity: 2 × 1.0 mm² or 2 × 1.5 mm²
- Features: adjustable minimum dimming level, selectable dimming mode, overload/overheat protection and inrush-current limiter
- Manufacturer-listed standards: BS EN 60669-1 and BS EN 60669-2-1
- EAN: 5056270868241
Lamp compatibility: use dimmable lamps only and check the intended load before installation. The manufacturer excludes fluorescent lamps and mixed loads, and recommends lamps of the same brand and type. Its product page also excludes mixing lamp brands or wattages in one fitting.
Two-way control: the exact manual permits one dimmer in the circuit with a conventional two-way plate switch at the other control point. Dimming from two separate dimmers is not supported.
Installation fit: fit the module to a suitable dimmer plate and wall box. Confirm the plate/shaft fit and wiring space for the actual installation; the supplied unit has not been physically measured. Disconnect the product before high-voltage or insulation-resistance testing, as required by the manufacturer instructions.
Manufacturer documents
The manufacturer lists a two-year warranty, subject to its installation and use terms.
📍 Same-day click & collect — 24 Western Avenue, Acton W3 7TZ (Mon–Fri 7:30am–5:30pm · Sat 8am–1pm)
🚚 Free delivery on orders over £50