Aquaflow 110mm Pushfit Fittings — Socket Plug, Coupling, Bend and Branch for UK Plumbers

When you need to connect, cap or redirect 110mm soil and waste runs without solvent cement, Aquaflow pushfit fittings are the trade solution. Push-to-connect installation, a secure rubber ring seal, and full compatibility with standard 110mm pipe mean you can complete soil stack alterations and drainage tie-ins quickly and confidently. APM Electricals stocks 13 active Aquaflow 110mm pushfit SKUs — including the UK's best-value 110mm socket plug.

Why Aquaflow 110mm Pushfit?

• No solvent, no cure time — rubber-ring seal locks on push, ready to test immediately
• Reusable and adjustable — fittings can be removed and repositioned during installation
• Standard 110mm bore — fits Aquaflow, Floplast, Osma, and all major soil pipe systems
• UV-stable black ABS (grey plug also available) — suitable for internal and external exposed runs
• Wide range in stock — plug, slip coupling, straight coupling, bends, adjustable bends, access pipe, vent cowl, and spigot branch

Featured Aquaflow 110mm Pushfit Fittings

Aquaflow 110mm Pushfit Waste Socket Plug - Grey

£2.90 inc VAT

The most cost-effective way to terminate an unused 110mm socket. Grey finish blends with light grey soil stack systems; rubber ring seal prevents odour escape. Essential stock for loft conversions, en-suite additions, and redundant branch terminations. APM's #1 selling plumbing product by unit volume.

View product

Aquaflow 110mm Pushfit Straight Coupling - Black

£4.49 inc VAT

Double-socket straight coupling joins two plain-ended 110mm pipes in line. Pushfit installation with twin rubber ring seals — no special tools required. The go-to coupling for extending or repairing soil runs where solvent welding is impractical. Available in black for external and internal stacks.

View product

Aquaflow 110mm Pushfit 90° Knuckle Bend Single Socket - Black

£8.27 inc VAT

Tight 90° single-socket knuckle bend for redirecting soil runs through right angles in confined spaces. Single socket accepts plain pipe; spigot end inserts into the next fitting. Suited to offset stacks, underfloor runs, and external soil pipe routes around corners. Black UV-stable ABS.

View product

Aquaflow 110mm Pushfit 45° Double Socket Spigot Branch - Black

£12.70 inc VAT

45° branch fitting for adding a soil or waste inlet to an existing 110mm run. Double socket accepts plain pipe on both main-run sockets; 45° spigot branch takes the new connection. Used for WC tie-ins, additional soil outlets, and multi-storey stack connections. Pushfit seals on all three ports.

View product

Full Aquaflow 110mm Pushfit Range at APM

Beyond these four core fittings, APM stocks the complete Aquaflow 110mm pushfit range:

• 110mm Pushfit Socket Plug - Black — £5.89
• 110mm Pushfit Slip Coupling - Black — £4.97
• 110mm Double Socket 92.5° Pushfit Black — £8.30
• 110mm Pushfit 90° Knuckle Bend Double Socket - Black — £9.43
• 110mm Pushfit 45° Single Socket Spigot Bend - Black — £5.53
• 110mm Pushfit Mushroom Vent Cowl - Black — £11.57
• 110mm Pushfit Adjustable Bend 0–45° - Black — £16.50
• 110mm Pushfit Adjustable Bend 0–90° - Black — £19.80
• 110mm Pushfit Access Pipe Coupling - Black — £18.60

All prices include VAT. Trade accounts available — contact APM for volume pricing.

Aquaflow 110mm Pushfit vs Solvent Weld — When to Use Each

For most domestic and commercial plumbing alterations, pushfit is the faster and more practical choice. Solvent weld remains preferred for permanently buried drainage or where Building Control specifies it.

Related Aquaflow Waste Pipe Content

• Aquaflow 110mm Soil Pipe Fittings (compression/solvent)
• Aquaflow 50mm Waste Pipe Fittings
• Aquaflow 40mm Waste Fittings
• Aquaflow 32mm Waste Fittings

Shop the full Aquaflow waste and soil pipe range at APM Electricals. Free delivery on orders over £50.

APM Electricals
24 Western Avenue, Acton, London W3 7TZ
Tel: 020 8702 8080 | www.apmi.uk