Skip to content

Consumer Units, MCBs, and RCBOs: Selecting and Installing a Split-Load Board to BS 7671:2018

A consumer unit and its protective devices must be selected as an approved assembly for the actual installation. Start with the electrician's circuit schedule, supply assessment and manufacturer's references. A metal enclosure, a “12-way” label or a familiar breaker shape is not proof of a complete suitable installation.

Safety first: switching off the consumer unit does not establish that incoming tails or every other supply is isolated. Do not remove its cover, disturb meter equipment or expose conductors to obtain a photograph. Have a competent electrician identify the supplies and establish safe isolation before work. An RCD cannot protect against every electric shock; do not treat 15mA, or any quoted current, as a safe level for a person. Repeated tripping, heat damage or a burning smell needs professional investigation, not a larger breaker or repeated resetting.

Four existing APM product routes

  • Axiom consumer-unit listing with 100A main switch — an enclosure-and-switch buying reference. Confirm the actual manufacturer part, revision, usable outgoing ways, busbar arrangement and supplied contents. The photograph does not establish that protective devices, surge protection or every required accessory are included.
  • MK Sentry metal consumer-unit listing with switch-disconnector — check total module capacity against usable outgoing ways. The recorded identifier is associated with Y5712SMET; the manufacturer's catalogue distinguishes a 12-way enclosure from its further ten one-module spaces after the switch. Confirm the actual supplied reference and layout rather than planning twelve outgoing circuits from the listing title.
  • Axiom 20A compact Type A RCBO listing — a specific protective-device reference for the installer's assessment. Its original photograph shows RCB020TA/B20/30mA markings, but does not certify the actual supplied revision, connection arrangement or approval in a particular board. It is not automatically compatible with the MK enclosure above.
  • MK 6A Type B MCB listing — an overcurrent-protection reference, not an RCD or a universal lighting-circuit specification. Ask for the exact manufacturer part and approved board family; the original picture does not make every model marking legible.

These are direct links to current product pages. Online stock is a system record, not a physical stock, approval or pack inspection. Confirm exact parts and contents before ordering; current price, availability and fulfilment information are on the product pages.

Send the electrician's materials list: call or WhatsApp 020 8702 8080 or 07737 263641. Include the board make/model, specified protective-device codes, quantity and required accessories. Use visible labels, packaging or disconnected spares for photos; do not open a live or potentially live enclosure for an enquiry.

Use the applicable current requirements

Checked on 2 November 2026, the IET's current-edition guidance identifies BS 7671:2018+A4:2026 and states that the previous transition ended on 15 October 2026. The electrician must establish the applicable edition and project circumstances. Historic “Amendment 3” wording on a product or old catalogue is not a certificate that the finished installation meets current requirements.

This article is a buying checklist, not a consumer-unit installation manual or a substitute for the standard. The need for replacement or upgrading should follow assessment of the existing installation and proposed work, not a blanket assumption from the age of a board or a catalogue description.

Know which function is being specified

  • Switch-disconnector: provides its specified switching and isolation functions. A plain main switch is not an overload circuit-breaker, and its current rating does not establish the actual service-fuse capacity.
  • MCB: provides the specified overload and short-circuit protection. It does not by itself provide residual-current protection.
  • RCCB/RCD: provides its specified residual-current function; do not assume a standalone RCCB also provides overcurrent protection.
  • RCBO: combines residual-current and overcurrent functions. Check its rated current, tripping characteristic, residual-current type, sensitivity, poles, supply requirements and declared assembly compatibility.
  • SPD and AFDD: address different hazards and have their own selection and installation requirements. They are not interchangeable with an ordinary MCB or RCD; combination devices must be identified from the exact manufacturer's documentation.

Do not confuse an MCB's B or C tripping curve with an RCD's waveform type, such as Type A or Type B. The MK Sentry catalogue identifies these characteristics separately. Its family examples are not permission to substitute one device or generation for another.

Split-load and individual-RCBO arrangements

An individual RCBO arrangement can reduce the effect of a fault on other circuits, but coordination with upstream protection and the actual design still matter. A shared-RCD arrangement requires careful circuit division and assessment of unwanted tripping and its consequences. There is no universal rule that every new installation must use one RCBO per circuit, or that a nominal dual-RCD board is automatically suitable.

Electrical Safety First's Wiring Regulations guidance discusses circuit division and manufacturer compatibility. Its Q1.40 warns against mixing equipment without the assembly manufacturer's confirmation of the specific arrangement. Physical DIN-rail fit, a shared brand name or matching current ratings alone are insufficient.

Specify usable space and the complete assembly

Ask for a manufacturer-supported layout showing incoming devices, outgoing circuits, required surge or arc-fault protection, control modules and spare capacity. Total enclosure modules and usable outgoing ways are different measurements. There is no universal conversion from a 16-way MCB board to a 24-way RCBO board.

The manufacturer-authored Sentry catalogue lists the Y5712SMET enclosure with a switch-disconnector and a further ten one-module products. This is an example of checking the exact reference, not physical certification of APM's supplied unit. Confirm current instructions, compatible devices, busbar and neutral arrangements, blanks, entries, enclosure protection and required accessories for the actual revision.

Give the installer the design questions

  • Supply: actual supply characteristics, service capacity, earthing arrangement, prospective fault conditions and any additional generation or storage supplies.
  • Circuits: assessed maximum demand, cable type and installation conditions, protective-device ratings and characteristics, and the consequences of losing a circuit.
  • Protection: required residual-current, surge and arc-fault functions for the actual equipment, use of the building and current requirements. A generic appliance table cannot select them.
  • Location and assembly: environmental conditions, enclosure suitability, access, cable entries and the manufacturer's declared device combination.
  • Existing installation: condition, test evidence and any remedial work needed before a replacement is connected.

This checklist does not prescribe cable sizes, fuse upgrades, terminal connections, torque values, test voltages, pass thresholds or energising steps. HSE's electrical-safety guidance explains competence, secure isolation and the limits of RCD protection.

Inspection, certification and building control

Agree responsibility for design, installation, inspection, testing, documentation and any notification route before work starts. Country and work scope matter: use the official England Approved Document P and the separate Wales guidance where applicable. Buying a board does not provide an installation certificate, and an EICR is not the same document as certification of new installation work.

Existing related guides

These working links provide related reading; they do not replace current primary instructions or recertify the contents of those pages:

For help matching a specified part, send the list to either business WhatsApp number above. Confirm the exact approved assembly with the electrician and manufacturer before purchasing components.

Previous article A toilet-seat hinge spare: the details needed to match it

Leave a comment

* Required fields

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare