Buying a caulking gun: what does “up to 380ml” actually tell you?
You have chosen the sealant, and the next item on the shopping list is a gun. A capacity figure looks like a quick way to choose one: the container says a certain number of millilitres, and the gun advertises a larger number. Before treating that as a match, establish what the container actually is and what its manufacturer says to use with it.
The useful first question is “which applicator does this container require?” Keep the exact product and its packaging format together. A volume tells you how much material is described; it does not give you a container drawing or identify the applicator. This is a buying distinction, rather than an instruction for loading or operating the gun.
Read the container before comparing guns
Suppose a job note gives only a sealant name and a nominal volume. That leaves the person buying the tool to infer the packaging. A more useful note identifies the exact sealant product, the container format shown on its label or product sheet, and any specified applicator. You can then compare a gun against a real requirement rather than against the quantity alone.
If you already have the container, use its own identification and instructions as the starting point. If you are ordering both items, read the information for the exact container being ordered. A similar-looking nozzle or a familiar brand name should not carry the whole compatibility decision.
The APM photograph shows the red frame, black trigger and exposed plunger rod. There is no cartridge in the photograph, so it does not demonstrate a particular gun-and-container pairing.
Where the Draper 16237 fits into that comparison
Draper’s product record identifies stock number 16237, part number RL-CGS. It describes a steel skeleton frame, a coated handle and use with cartridges up to 380ml. That is the manufacturer’s stated cartridge category and nominal capacity for this model.
Read “cartridges up to 380ml” as one requirement to compare with the container information. It is not evidence that every package carrying a smaller volume is interchangeable. The cited record gives no container drawing or complete dimensional matching chart; this guide therefore does not supply one or extend the statement to other packaging formats.
Two buying situations, two different next steps
You have an identified cartridge and its applicator requirement. Compare that requirement with the exact 16237 specification. If a particular dimension or applicator feature is essential, resolve it before buying; the capacity figure alone cannot fill that gap.
You have only a volume or a vague description such as “a tube of sealant”. Complete the container choice first. Changing to a higher-capacity gun would not, by itself, answer the missing question about which applicator the container requires.
Keep the material choice separate, too. Choosing this gun does not establish that the sealant is right for a surface, joint or exposure. Those decisions belong to the instructions for the exact material. The gun’s frame description and capacity are not a substitute for them.
Buy the identified model, with the limit understood
The linked APM item is the Draper Redline 16237. Draper marked this model discontinued in the manufacturer record checked on 20 October 2026; current APM availability is shown on the product page. The record is a basis for identifying the model and its published specification, rather than a promise about the revision or contents of a supplied item.
Manufacturer reference: Draper 16237 / RL-CGS product record, checked 20 October 2026. Container and material requirements should come from the exact product you intend to use.
Leave a comment