McAlpine R4M is the 19/23mm Universal selection in the straight overflow tank connector family. The range also offers a push-fit choice. Use the R4M reference when the Universal connection is specified; a request for a “¾-inch tank connector” alone does not identify that choice.
This component connects an overflow route at a tank to overflow pipework. It is a different parts enquiry from a water-supply fitting. Establish which route you are dealing with before choosing by the appearance of a white plastic connector.

Read the thread and pipe labels separately
The official R4M drawing text gives two kinds of specification:
| Drawing label | What it describes |
|---|---|
| ¾-inch BSP | A thread designation. |
| To suit 19–23mm pipe | The pipe range stated on the drawing. |
Allow for the route beyond the straight connector
If the overflow pipe must turn after leaving the tank, that turn still belongs in the overall layout. A straight connector does not specify the onward route or establish that the required turn will clear a nearby panel. An overall photograph of an already safely accessible arrangement can show that obstruction and access around the connection; a close-up of the fitting alone may miss both.
Before buying, have the installer match the actual tank interface and pipe identification to the proposed component. Neither drawing label supplies a tank-hole diameter or permitted wall thickness. If that interface is unidentified, pause selection until it can be established; do not disturb a tank or alter an opening to complete a shopping record. Confirm the supplied model and contents where they are needed to complete the order.
Buy now: McAlpine R4M straight overflow tank connector at APM
Manufacturer references: Straight Overflow Tank Connector, selected R4M and R4M technical drawing. Part-selection guidance, not installation instructions or an approval certificate.
Leave a comment