Ordering a Pegasus 22 mm coupler by its catalogue code

“Pegasus 22 mm coupler” can identify two different entries in the Embrass Peerless catalogue. Its September 2024 guide lists 435605 under Slip Coupler C × C and 435119 under Coupler C × C. If a job specifies the slip fitting, carry the word slip and the catalogue reference through to the order.

Read the catalogue line as well as the size

• 435605 is the 22 mm Slip Coupler C × C entry in the dated Pegasus guide. A UK trade catalogue pairs that order reference with barcode 5055967926578, the identifier associated with the featured listing.
• 435119 is the separate 22 mm Coupler C × C entry. Embrass Peerless also lists it on its Water Only Coupler product page.

The shared nominal size gives you one part of the description. Use the full fitting name and the code together when comparing a quote, a label or a parts list. If a quote shows a different code or describes a short slip version, confirm the exact reference and body length with the merchant before ordering.

Prepare an order note the merchant can check

Start with the specified system, fitting description, nominal size and exact order reference. Write down any maximum body length or clearance stated on the job sheet. If the fitting has to match existing pipe or equipment, ask the installer to confirm the tube specification and required pressing system against the documentation for the supplied fitting.

A sample request is “Pegasus 22 mm Slip Coupler C × C, reference 435605. Please confirm the current label, fitting length and quantity supplied.” If you only have a picture or an order that says “22 mm coupler”, ask for the missing reference before treating the listings as substitutes.

Buy now: Pegasus 22 mm press-fit slip coupler

Check the Embrass Peerless September 2024 product guide, the maker’s Water Only Coupler catalogue page and the UK trade catalogue entry for reference 435605.