Summer is bathroom season. If you're doing bathroom tap replacements, this is the job breakdown you need — from shutting off the supply with isolation valves, to spec'ing the right flexi connectors, to leak-testing the finished install.
Pipe Lagging and Insulation: A Practical Guide for Plumbers, Heating Engineers, and Electricians Pipe insulation does three jobs: it stops pipes freezing in winter, it prevents heat loss in heating systems, and it stops cold-water pipes sweating in summer. Getting...
Non-contact testers, two-pole voltage testers, proving units, and lockout devices — a practical guide to the tools and procedures UK electricians need for safe isolation under GS38 and the Electricity at Work Regulations.
Why Cable Sizing Matters Selecting the correct cable size is one of the most safety-critical decisions an electrician makes. Undersized cables overheat, trip protective devices, and in worst cases cause fires. Oversized cables waste money and space. The goal is...
A practical APM trade guide to choosing Aquaflow pipe clip sizes for 32mm, 40mm and 50mm waste pipe, 20mm and 25mm MDPE, and rubber-lined metal clips.
A fuller APM wet underfloor heating installation guide covering what goes under the pipe, what fixes the pipe down, what screed goes above it, and the typical thickness ranges installers work to.
2D lamps are still used across many UK homes and commercial buildings, especially in bulkhead fittings, communal corridors, stairwells, toilets, bathrooms, utility rooms and older low-profile ceiling lights. They give a broad, even spread of light from a compact square...
A practical guide to portable bidets and rechargeable travel shatafs, when to use one, how it compares with a fitted bidet shower, and what APM stocks for travel and permanent bathroom use.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
