End Feed, Compression or Push-Fit: Which Copper Fitting Should You Use? If you are plumbing in copper, you have got three connection methods to choose from: end feed, compression, and push-fit. Each has its place on the job. Get it...
Air source heat pumps (ASHPs) have moved from niche to mainstream in UK residential and light commercial heating. With the Boiler Upgrade Scheme (BUS) offering £7,500 grants and increasing pressure to decarbonise heating, qualified installers are in high demand. This guide covers the fundamentals of ASHP systems, hydraulic integration, commissioning, and the regulatory requirements every heating engineer needs to know.
A practical guide to bending copper pipe — hand benders, pipe springs, ratchet and hydraulic machines, minimum bend radii, measuring techniques, and common defects for 15mm to 54mm pipe.
Every appliance, every tap, every toilet needs a way to isolate it without draining the whole system. Get the valve selection wrong and you’re either under-specced for the application or over-engineering a simple under-sink connection. This guide covers isolating valves,...
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
